High-Grade Drilling & Channel Sampling Results
Sydney, May 28, 2021 AEST (ABN Newswire) - Alta Zinc Limited (
ASX:AZI) (8EE:FRA) is pleased to announce the results of drill holes POD11 to POD13 and five channel samples (POCH12-16) which returned multiple intersections of zinc, lead and silver mineralisation from new drill locations in the Ponente area of the Gorno Mine.
These results have extended the thick and high-grade mineralisation 125m to the east of the initial drill Pad A and defined a thick and high-grade zone in a N-S direction from Pad D (Figure 1*). The mineralisation appears to be a shallow dipping lens of variable thickness, with recent drill intersections suggesting an average true thickness of 10m in this area.
Geraint Harris, MD of Alta Zinc commented:
"Ponente drilling and channel sampling continues to push out the extent of the mineralisation and it is very encouraging to see these high-grades and good thicknesses being defined with consistency. These results will flow into our upcoming Mineral Resource estimate (MRE), and with two drill rigs now in Ponente we will endeavour to complete coverage of the Ponente West area prior to the MRE data cut-off. However, Ponente remains wide open to the north, east and south with many exciting drilling targets, giving us significant additional growth potential post MRE."
Several of the drill holes were collared in mineralisation in the sidewalls of the drives and this mineralisation was channel sampled and the results aggregated with the drill hole intercepts to give a resultant total thickness. A combination of positive angled (up) drill holes at Pads D, E and F (POD11 to POD13), and channel sampling at drill collars and positions between the drill-holes returned several significant intersections including:
- the aggregate of channel sample POCH14 and drill hole POD11 returned:
12.8m @ 11.4% Zn, 2.2% Pb and 30g/t Ag from floor to end of hole
- the aggregate of channel sample POCH12 and drill hole POD13 returned:
10.6m @ 5.7% Zn, 1.4% Pb and 10g/t Ag from collar, including
3.4m @ 10.7% Zn, 2.0% Pb and 11g/t Ag from collar
In this area the drilling and channel sampling results confirm a 10m average true thickness of mineralisation which extends from the first drill pad (Pad A) 125m to the south-east (Figure 1*). Geological and structural logging indicates a general dip to the SSE at approximately 5-10 degrees, and with slight undulations caused by N-S oriented mineralised structures (Figures 2 and 3*).
Mineralisation at Ponente remains open to the north-east, east and south. Geological interpretation of historical exploration data suggests the mineralisation may extend approximately 400m to the north-east into an area where historical drilling intersected significant mineralisation and mineralisation is visible in the sidewalls, and approximately 300m to the south where it may extend to the northern end of the current Zorzone Mineral Resource area. These extension areas will be drilled and channel sampled in due course.
Highlighted mineral intervals, aggregated mineral widths, drill locations and drill results are listed variously in Tables 1 to 5*. This includes POD11, which was previously released on 21 April 2021. The selection criterion for Table 1 is where grade is greater than 0.5% Zn and the interval contains a maximum of two consecutive samples with grades less than or equal to 0.5% Zn. The attitude of the mineralisation is thought to be generally dipping to the south-east at approximately 5-10 degrees, with slight undulation caused by N-S mineralised structures. Some intersections may be biased and true width for these intersections will be confirmed once collar surveys, hole deviation surveys and geological modelling is finalised. Sections provided in the text show reasonably accurate depictions of the attitude of the mineralised horizons, and the angles of drill hole intercepts.
*To view tables and figures, please visit:
https://abnnewswire.net/lnk/6FW95992
About Altamin Limited
Altamin Limited (ASX:AZI) has been exploring and developing Italian brownfield projects since 2015, focused on commodities aligned to the EU's energy transition goals to relaunch mining with minimal environmental impact, supported by government, stakeholders and partners.
| ||
|
